F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
Hose/Line HVAC: Service and Repair
Condenser To Evaporator Line
CONDENSER TO EVAPORATOR LINE
Removal and Installation
All vehicles
1. Recover the refrigerant.
Vehicles with 6.4L diesel
2. With the vehicle in NEUTRAL, position it on a hoist.
3. Remove the air cleaner and air cleaner outlet tube.
All vehicles
4. Remove the condenser outlet fitting nut and disconnect the fitting.
-
Discard the O-ring seal and gasket seal.
-
To install, tighten to 15 Nm (11 lb-ft).
5. Disconnect the evaporator inlet fitting.
-
Discard the O-ring seals.
6. Detach the condenser-to-evaporator line clip.
7. Remove the condenser-to-evaporator line.