F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
High-Pressure Fuel Injection Pump Heat Shield (Part 2)
Fuel Rail Supply Tube
Removal
Both sides
NOTE: It is recommended that this component be serviced with the vehicle body removed. If the body cannot be removed, refer to Fuel Rail Supply
Tube - Body On.
1. WARNING: Do not work on the fuel system until the pressure has been released and the engine has cooled. Fuel in the high-pressure fuel
system is hot and under very high pressure. High-pressure fuel may cause cuts and contact with hot fuel may cause burns. Failure to
follow these instructions may result in serious personal injury.
