F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
Fuel Rail Supply Tube
Removal
All vehicles
NOTE: It is recommended that this component be serviced with the vehicle body removed. If the body can be removed, refer to Fuel Rail Supply
Tube - Body Off.
1. WARNING: Do not work on the fuel system until the pressure has been released and the engine has cooled. Fuel in the high-pressure fuel
system is hot and under very high pressure. High-pressure fuel may cause cuts and contact with hot fuel may cause burns. Failure to
follow these instructions may result in serious personal injury.
Shut the engine off and wait until the engine is cool or 5 minutes, which ever is longer, to allow the high-pressure fuel system to bleed off and the
fuel to cool.
2. Remove the turbocharger. Carry out the Turbocharger - Body On procedure. See: Turbocharger/Service and Repair/Removal and
Replacement/Turbocharger - Body On
