F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
Part 2
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the coolant degas module.
3. Remove the upper cooling fan shroud.
4. Position the front wheels to the right.
5. Loosen the LH charge air cooler (CAC) tube clamp and disconnect the tube from the lower flex joint.
-
To install, tighten to 8 Nm (71 lb-in).
6. Disconnect the lower radiator hose position retainers.
7. Remove the nut for the oil level indicator tube.
-
To install, tighten to 31 Nm (23 lb-ft).
8. Remove the bolt and position the oil level indicator tube aside.
-
To install, tighten to 13 Nm (10 lb-ft).
9. Loosen the LH CAC tube clamp and remove the upper flex joint.
-
To install, tighten to 8 Nm (71 lb-in).
