F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
Child Seat Tether Attachment: Description and Operation
CHILD SAFETY SEAT TETHER ANCHOR
WARNING: Always tighten the child safety seat tether anchor/bolt to specification. Failure to follow this instruction may result in the child's
safety seat being incorrectly secured, which increases the risk of serious personal injury or death to the child in a sudden stop or crash.
If you have a SuperCab or Crew Cab, Ford recommends you attach child safety seats in the rear seating position (if possible) with a tether strap attached
to the tether anchor bracket or strap as shown in the instructions provided with the child safety seat.
Any child safety seat tether anchor in use during a collision must be installed new. Rework the sheet metal to its original condition and structural
integrity. Refer to the appropriate Removal and Installation procedure.
Regular Cab
Child Safety Seat Tether Anchors have been provided at all regular cab passenger seating positions. They are part of the back panel sheet metal.
SuperCab
A child safety seat tether anchor has been provided at the front row outboard passenger seating position. This is located directly beneath the seat back
cushion and welded in place.
Child Safety Seat Tether Anchors are provided at all SuperCab second row seating positions. They are attached to the back panel sheet metal.
Crew Cab
Child Safety Seat Tether Anchors are not provided in the Crew Cab front row seating.
Child Safety Seat Tether Anchors are provided at all Crew Cab second row passenger seating positions. They are part of the back panel sheet metal.
