F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
2. Remove the bolt and the safety belt buckle.
-
To install, tighten to 40 Nm (30 lb-ft).
3. NOTE: Make sure the safety belt webbing is not twisted prior to installation.
To install, reverse the removal procedure.
-
Make sure the safety belt buckle is accessible to the occupant after installation.
4. Check the active restraint system for correct operation.
Safety Belt Buckle - Rear, SuperCab
SAFETY BELT BUCKLE - REAR, SUPERCAB
