F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
Stabilizer Bushing: Service and Repair
Stabilizer Bar Bushing
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the 4 stabilizer bar bracket nuts and the 2 stabilizer bar brackets.
^
To install, tighten to 48 Nm (35 ft. lbs.).
3. Position the stabilizer bar to access the bushing.
4. Remove the bushing.
5. To install, reverse the removal procedure.
