F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
Installation
1. Connect the TCM to the bracket.
1. Install the TCM-to-bracket bolts.
^
Tighten to 8 Nm (71 inch lbs.).
2. Connect the TCM electrical connector.
2. Install the TCM and bracket onto the frame.
1. Install the TCM bracket-to-frame bolts.
^
Tighten to 48 Nm (35 ft. lbs.).
2. Install the splash shield.
3. Connect the battery ground cable. For additional information, refer to Battery.
