F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
Pressure Plate: Service and Repair
Clutch Pressure Plate Locating Dowels
Clutch Pressure Plate Locating Dowels
Removal
1. NOTE: Do not damage the bore or the surrounding surface area.
When installed in an open hole, use a drift to remove the dowel. When installed in a blind hole, use locking pliers to remove the dowel.
^
There are 2 dowels on the diesel engine flywheel and 3 dowels on the gasoline engine flywheel.
Installation
1. NOTE: Do not damage the bore or the surrounding surface area.
Using a brass or plastic mallet, drive the dowels squarely into place until fully seated in the bore.
