F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
4. NOTE: Align the index marks if installing the original clutch pressure plate.
Install the clutch pressure plate.
1. Position the clutch pressure plate on the dowels.
^
The diesel engine flywheel has 2 dowels. The gasoline engine flywheel has 3 dowels.
2. Using a suitable clutch alignment tool, align the clutch disc and the pressure plate.
3. Install the clutch pressure plate bolts and tighten in a star pattern sequence.
^
For the 5.4L and 6.8L engines, tighten to 45 Nm (33 ft. lbs.).
^
For the 6.4L engine, tighten to 28 Nm (21 ft. lbs.).
4. Remove the clutch alignment tool.
5. Install the transmission.
6. Test the system for normal operation.
