F 250 4WD Super Duty V8-6.4L DSL Turbo (2008)
Front Washer System
Removal and Installation
WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice.
In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. Failure to follow these instructions may result in serious personal
injury.
CAUTION:
-
When servicing the windshield washer pump, be careful not to damage the windshield washer pump seal.
-
Do not operate the windshield pump before filling the windshield washer reservoir. Failure to do so could result in premature pump
failure.
NOTE: The washer reservoir is integrated with the battery tray and cannot be serviced separately.
1. Remove the vehicle battery.
2. Remove the 3 windshield washer reservoir bolts.
-
To install, tighten to 17 Nm (13 lb-ft).
