F 250 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Hood Latch Release: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the Powertrain Control Module (PCM).
3. Remove the nuts.
4. Lower the hood latch release/park brake bracket and position aside.
5. Disconnect the hood latch release cable.
6. Release the retaining clip from the hood latch release handle to the park brake bracket.
7. Release the return spring and remove the hood release handle.
INSTALLATION
1. To install, reverse the removal procedure.