F 250 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Evaporator Core: Service Precautions
CAUTION:
^
Overtightening of the nut during installation will cause the stud to break away from the floor pan.
^
It may be necessary to cut the underbody auxiliary line(s) being serviced into sections to facilitate removal. Make sure to correctly identify the
line(s) being serviced before carrying out any cutting of the line(s).
^
Pull the bracket off the stud before attempting to pry it off the lines to prevent component damage.
^
Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
^
Spring-type clamps are installed as original equipment. Installation and overtightening of non-specification clamps can cause leakage at the heater
water hose connection and damage the heater core.
