F 250 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Powertrain Control Module: Service and Repair
REMOVAL
1. Disconnect the battery ground cable. On vehicles equipped with dual batteries, refer to Battery.
CAUTION: Always disconnect the battery ground cable prior to working on the electronic engine controls.
2. Disconnect the wiring harness.
1
Loosen the bolt.
2
Remove the wiring harness.
3. Remove the Powertrain Control Module (PCM).
1
Remove the screws.
2
Remove the cover.
3
Remove the powertrain control module.
INSTALLATION
