F 250 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
12. Install the tilt wheel handle and shank.
13. Install the steering wheel. Do not install the driver air bag module at this time.
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS,
NOTES, AND INSTRUCTIONS IN THE STEERING WHEEL REMOVAL AND INSTALLATION PROCEDURE.
14. Attach the restraint system diagnostic tools to the clockspring electrical connectors at the top of the steering column.
15. Connect the battery ground cable.
16. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental restraint system (SRS).
17. Disconnect the battery ground cable and wait at least one minute.
18. Remove the restraint system diagnostic tools from the clockspring electrical connectors at the top of the steering column.
19. Install the driver air bag module.
1
Connect the horn electrical connector.
2
Connect the driver air bag module electrical connector.
3
Position the driver air bag module into the steering wheel.
4
Install the two bolts.
5
Install the two steering wheel back cover plugs.
20. Restore the vehicle to operating condition.
1
Reactivate the supplemental restraint system (SRS).
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS,
CAUTIONS, NOTES, AND INSTRUCTIONS IN THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
DEACTIVATION/REACTIVATION PROCEDURE.
