F 250 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
7. Remove the restraint system diagnostic tool 418-F088 (105-R0012) from the vehicle harness side of the passenger air bag module electrical
connector.
8. Through the glove compartment opening, connect the passenger air bag module electrical connector.
9. Remove the restraint system diagnostic tool 418-F088 (105-R0012) from the clockspring side of the driver air bag module electrical connector.
10. Install the driver air bag module.
11. Reconnect the battery ground cable.
12. Prove out the system.
