F 250 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
35. Place two bolts into the differential housing cover at the 8 o'clock and 2 o'clock positions. Install the differential housing cover.
^
Use the two bolts to position the differential housing cover on the differential housing.
36. Install the remaining bolts. Tighten the bolts alternately and evenly.
^
Allow 1-hour cure time before filling the axle with the correct amount of specified lubricant.
37. NOTE: Align the index marks made during removal.
Connect the driveshaft to the rear axle.
38. CAUTION: For Trac-Lok axles, first fill the axle with 0.2365 liters (0.5 pints) of Additive Friction Modifier.
Fill the axle with the specified type and amount of lubricant.
Axle Assembly - Removal and Installation
Axle Assembly
Special Tools
