F 250 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Special Tool(s)
Disassembly
1. Remove the differential case.
2. NOTE: The differential bearings need not be removed to overhaul the Ford limited slip differential. If bearing removal is required.
NOTE: The anti-lock speed sensor ring cannot be reused once removed.
Remove the differential pinion shaft lock bolt, and remove the differential pinion shaft.
^
If required, remove the ring gear and anti-lock speed sensor ring.
3. NOTE: This tool does not have the 1/2-inch drive hole.
Install the special tool in a suitable vise.
