F 250 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Installation
1. Using the special tool, install the pinion seal.
^
Lightly coat the pinion seal lip with SAE 8OW-90 Premium Rear Axle Lubricant XY-80W90-QL or equivalent meeting Ford specification
WSP-M2C197-A.
^
For model 50 axles, use special tool 205-137 to install the pinion seal.
^
For model 60 axles, use special tool 205-208 to install the pinion seal.
2. CAUTION: Never use a metal hammer on the pinion flange or install the flange with power tools. If necessary, use a plastic hammer to tap on a
tight fitting flange.
NOTE: Align the index marks.
Lightly coat the flange splines and seal mating area with SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL or equivalent meeting Ford
specification WSP-M20 97-A, and install the flange with a new washer and nut.
3. CAUTION: Never back off the pinion nut to reduce preload. If preload reduction is necessary, install a new collapsible spacer and pinion nut.
