ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Ignition Rotor|Service and Repair > < Ignition Rotor - Alignment Procedure|Page 2150
Page 3
background image

FIGURE 13

6.

If the vehicle is a 1983 model equipped with a 5.0L engine, coat the rotor with silicone grease as shown in Figure 13.

7.

Reinstall distributor cap and rotor making sure wires are firmly seated in the distributor cap terminal housings and on the spark plugs.

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"

Ignition Rotor|Service and Repair > < Ignition Rotor - Alignment Procedure|Page 2150