F 350 2WD Pickup V8-351 5.8L (1983)
Figure 24 - Hanger Clearance
2.
Rework a new double link hanger to fit: See Figure 23 and 24.
a.
remove lower portion of bracket
b.
drill new 8.7 - 9.2 mm bolt holes in bracket
c.
drill two new 8.7 - 9.2 mm mounting bolt holes in frame web.
d.
install bracket on frame using N605906-S2 bolt and (2) nuts N620481-S50.
c.
Re-road test to establish concern resolution. If concern is not resolved, continue procedure.
3.
Alternator Drive Ratio Resolution: 5.8L - All Model Vehicles
a.
Remove 2.62" alternator pulley and replace with 2.75" pulley.
b.
Road test. If condition is still present, replace alternator pulley with 3.0" pulley.
c.
Road test. If concern is still present, continue with procedure.
