F 350 2WD Pickup V8-351 5.8L VIN H 4-bbl HP (1985)
Rear Wheel Hub-Dana Full-Floating Axle F-250, F-35O
5. Do not remove or even turn the wheel bearing adjusting nut until the locking wedge is removed. Pry out with a screwdriver.
6. Using a heavy duty dolly such as the Rotunda model 014-00030 or equivalent, raise the wheel to the point that all weight is removed from the
wheel bearings.
7. Remove the wheel bearing adjusting nut.
8. Remove the outer bearing cone, pull the wheel assembly straight out and away from the axle.
9. Thoroughly clean the spindle of the axle housing.
