F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Wheel Cylinder: Service and Repair
Removal and Installation
REMOVAL
1. Raise vehicle on hoist and position suitable safety stands under vehicle.
2. Remove wheel.
3. Remove the brake drum and rear brake shoes and linings. Remove the wheel cylinder brake shoe links.
4. Disconnect the rear brake tube from the rear wheel cylinder. Remove the wheel cylinder retaining bolts and lock washers, and then remove the rear
wheel cylinder from the brake backing plate.
INSTALLATION
1. Place the rear wheel cylinder on the brake backing plate and install the retaining bolts and lock washers.
2. Connect the rear brake tube to the rear wheel cylinder.
3. Install the rear brake shoes and linings and the wheel cylinder brake shoe links.
4. Install the brake drum and the wheel.
5. Adjust the brakes.
6. Bleed the system.
7. Check brake operation before moving the vehicle.