F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
17. Using 2-3 Jaw Puller D8OL-1O13-A with Bearing Pulling Attachment D79L4621-A and Step Plate D8OL-630-6 or equivalents, remove the
parking brake rear bearing from the mainshaft.
18. Remove the parking brake rear seal from the mainshaft. Discard the seal.
19. NOTE: Insert the tool jaws into the recesses provided in the parking brake housing.
Using Bearing Cup Puller T77F-1 102-A, remove the parking brake rear bearing cup from the parking brake housing.
2O. Turn the parking brake housing over and remove the mainshaft spacer. Remove the O-ring from the spacer.
21. Using Seal Remover TOOL-1175-AC or equivalent, remove the parking brake front seal. Discard the seal.
22. Remove the parking brake front bearing cone from the parking brake housing.
23. NOTE: Position the tool jaws in the recesses provided in the casting.
