F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
3. Install temperature control switch in heater control and position A/C temperature cable so that all three retaining tabs and the beveled gearing is
properly aligned. Be sure all components are adjusted to the full warm position.
4. Push A/C temperature cable onto temperature control switch until it is fully seated and all retaining clips are engaged.
5. Install heater control.
6. Working through glove compartment opening, position temperature blend door in the full warm position.
7. Align A/C temperature cable to locating post, align cable assembly hardshell positioning tab with keyed area on the heater air plenum chamber and
the temperature blend door actuator post aligned with the cam on the cable head.
8. Push assembly onto plenum until retaining tab is engaged. Install retaining bracket.
9. Rotate the temperature control knob and check for operation of the temperature blend door.
