F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Air Door Cable: Service and Repair
With Manual A/C
REMOVAL
SPECIAL SERVICE TOOL(S) REQUIRED
Description
Tool Number
Temperature Control Cable Removal Tool
T94P-18532-A
1. Disconnect battery ground cable.
2. Release glove box to gain access to the A/C temperature cable at the heater air plenum chamber.
3. Release the retaining tab on the A/C temperature cable and lift the cable off the heater air plenum chamber.
4. Remove the trim strip above the A/C control and glove compartment area.
5. Remove two screws retaining the center finish trim panel to the instrument panel.
6. Remove the center finish trim panel.
7. Remove four screws retaining the A/C control to the instrument panel.
8. Pull the A/C control from the instrument panel far enough to gain access to the back of the A/C control.
Heater Control Electrical Connections
9. Remove the hardshell electrical connectors from the heater blower motor switch and the function control switch.
10. Pull temperature control knob off A/C control.
11. Remove one screw retaining the A/C temperature control bracket to the A/C control.
12. Rotate the A/C temperature control bracket and remove from A/C control.