F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
10. Install center finish trim panel around A/C control.
11. Install two screws retaining center finish trim panel to instrument panel.
12. Install trim strip above A/C control and glove compartment area (push on).
13. Install temperature control knob.
14. Rotate temperature control knob and check for proper operation of temperature control components.
15. Attach glove compartment.
16. Connect the battery ground cable.
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control
Module (PCM) relearns its adaptive strategy. The vehicle may have to be driven 16 km (10 miles) or more to relearn the strategy.
