F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Refrigerant Pressure Sensor / Switch: Service and Repair
A/C Cycling Switch
REMOVAL
1. Disconnect wire connector from A/C cycling switch.
2. Unscrew A/C cycling switch from suction accumulator/drier.
NOTE: Do not vent refrigerant charge.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Use new O-ring lubricated with clean refrigerant oil. Tighten A/C cycling switch to 1-5 Nm (13-47 lb-in).
3. Check system for proper operation.
