F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Glove Box Lamp: Service and Repair
REMOVAL
1. Open glove compartment door .
2. Remove the one screw retaining the lamp/striker assembly to the instrument panel.
3. Pull the lamp/striker assembly down and disconnect the wiring connector.
INSTALLATION
1. Connect the wiring connector to the lamp/striker assembly.
2. Position the lamp/striker assembly to the instrument panel and install retaining screw. Do not tighten the screw.
3. Adjust the glove compartment door closed position with the lamp/striker assembly. Tighten lamp/striker assembly retaining screw.
