F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
23.
Install axle housing cover.
24.
Tighten all cover bolts (except ratio tag bolt) to 38-52 N.m (28-38 lb-ft). Install ratio tag and tighten hold-down bolt to 24-38 N.m (18-28 lb-ft).
25.
Remove axle filler plug.
26.
If axle is equipped with a Traction-Lok differential, add 0.24L (8 oz) of Additive Friction Modifier (C8AZ-19B546-A, or equivalent meeting Ford
specification EST-M2C118-A) through the filler hole.
27.
Add approximately 3L (6.5 pints) 75W140 Synthetic Rear Axle Lubricant (F1TZ-19580-B, or equivalent meeting Ford specification
WSL-M2C192-A) to the axle, or until the lubricant reaches the bottom of the filler hole.
28.
Tighten axle filler plug 20-40 N.m (15-30 lb-ft).
29.
Road test vehicle.