F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Radiator Hose: Service and Repair
Upper and Lower Radiator Hoses
REMOVAL
1. Drain the radiator.
NOTE: Radiator hoses should be checked as directed in the applicable Maintenance Schedule. Replace whenever hoses become cracked, rotted
or have a tendency to collapse.
2. Slide the hose clamps onto hose at each end of the hose to be removed. Slide the hose off the radiator connection and the water outlet connection
(upper radiator hose) or the water pump connection (lower radiator hose).
INSTALLATION
1. Position the hose clamps at least 3.2 mm (1/8 inch) from each end of the hose. Coat the connection areas with an approved water-based lubricant
and slide the hose on the connections. Install the constant tension clamps.
CAUTION: Make sure the hose clamps are beyond the bead and placed in the center of the clamping surface of the connections.
2. Fill the radiator.
3. Start the engine, check the hoses and connections for leaks.
