F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Air Flow Meter/Sensor: Service and Repair
California Models Only
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module
relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
CAUTION: Sensing elements located in the mass air flow sensor must not be probed or cleaned.
1. Disconnect battery negative cable.
2. Disconnect air tube at sensor.
3. Disconnect wiring at sensor.
4. Remove four retaining nuts and sensor.
5. Remove gasket.
6. To install, follow removal procedure in reverse order.