F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Ignition Coil: Service and Repair
Ignition Coil
1. Disconnect wiring harness at ignition coil.
CAUTION: Do not pull directly on high tension wire. It can separate from connector in boot. Grasp boot by hand and remove with a twisting
motion.
2. Disconnect high tension wire at ignition coil.
3. Remove ignition coil to bracket retaining screws and remove ignition coil.
4. To install, follow removal procedure in reverse order. Tighten ignition coil-to-bracket retaining screws to 2.8-4.0 Nm (25-35 lb in).