F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Oxygen Sensor: Service and Repair
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module
relearns its adaptive strategy. The vehicle may need to be driven 16km (10 miles) or more to relearn the strategy.
1. Raise vehicle.
2. Disconnect battery negative cable.
3. Disconnect the heated oxygen sensor (HO2S) electrical connector.
4. Remove the sensor using Oxygen Sensor Wrench T94P-9472-A.
5. To install, follow removal procedure in reverse order. Tighten sensor to 36-46 Nm (27-34 lb ft).