F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
10. If the (A) service lock is missing, apply two (B) strips of masking tape across the air bag sliding contact and housing to prevent accidental rotation.
NOTE: The air bag sliding contact has a service lock that prevents accidental rotation when the steering wheel is removed.
11. Remove the key-in ignition warning indicator switch.
12. Disconnect the air bag sliding contact electrical connector and separate air bag electrical connector from the bracket.
13. Pry the retaining clips loose.
14. Separate wire from the two retaining clips holding wire to the column.
15. Remove the air bag sliding contact.
-
Feed the wiring harness through the instrument panel.
