F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Clutch Switch: Initial Inspection and Diagnostic Overview
1. Visually inspect the system components for the customer's concern.
-
Restricted clutch pedal travel.
-
Damaged clutch pedal position switch.
-
Damage to wiring harness.
-
Loose or corroded connections.
2. Check the wiring harness for obvious signs of shorts, opens, bad connections, or damage.
3. If fault is not visually evident, determine the symptom and proceed to the component test. See: Component Tests and General Diagnostics