F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Clutch Switch: Component Tests and General Diagnostics
1. Disconnect harness connector at CPP switch.
Clutch Pedal Position Switch
2. Refer to the chart. As directed, connect a Rotunda 73 Digital Multimeter or equivalent to the specified CPP switch pins, position the clutch pedal
as specified and record the resistance reading.
3. If resistance values are not as specified, replace CPP switch.
4. If resistance values are as specified, CPP switch is OK. Check starting system and ignition switch.
