F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
required clearance. Horizontal fasteners must be installed with the bolt heads on the inside surface of the front axle bearing brackets.
2. To make sure positioning of the front axle bearing brackets is correct, tighten the horizontal fasteners in the side of the front crossmember to
88-118 Nm (65-87 ft. lbs.). Tighten the vertical fasteners in the top of the front crossmember to 88-118 Nm (65-87 ft. lbs.).
3. Position the axles in the front axle bearing bracket. Install the pivot bolt and tighten nut to 149-201 Nm (110-148 ft. lbs.).
4. Remove the blocks under the engine and lower the engine into position. Tighten the bolts to specification.
