F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
11. Install solenoid body assembly over stud and attach with nine Torx bolts using a T30 bit and one nut using a 10 mm socket. Tighten to 9-11 Nm
(80-100 Inch lbs.).
NOTE: Prior to solenoid body assembly installation, coat the case connector bore with Silicone Brake Caliper Grease and Dielectric Compound
D7AZ-19331-A (Motorcraft WA-10) or equivalent meeting Ford specification ESA-M1C171-A. Inspect solenoid body assembly electrical
connector for proper seating and condition.
12. Select the appropriate style filter assembly and transmission pan for either 4x2 or 4x4 models.
CAUTION: Do not mix 4x4 and 4x2 transmission fluid filters and transmission pan assembly components. Transmission damage can result.