F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
Flex Plate: Service and Repair
REMOVAL
1. Remove the transmission from vehicle.
2. Remove the flywheel mounting bolts and remove flywheel from the crankshaft.
INSTALLATION
1. Install flywheel on crankshaft. Install the mounting bolts. Tighten to 103-115 Nm (75-85 ft. lbs.).
2. Check flywheel runout and flywheel ring gear runout using Rotunda Dial Indicator with Bracketry 014-00282 or equivalent. If readings are not
within specification, replace flywheel.
3. Install transmission assembly into vehicle.
