ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

A/T - Poor Towing Power|Page 2655 > < Vacuum Regulator Valve - Adjustment Procedure|Page 2646
Page 1
background image

Valve Body: Customer Interest
A/T - Poor Towing Power

Article No. 85-21-17

POWER - LOW (6.9L DIESEL/C-6 AUTOMATIC TRANSMISSION) - PULLING TRAILER ON A SUSTAINED GRADE AT RECOMMENDED
GROSS COMBINED WEIGHT(GCW)- 3.54/3.55/3.73 OR 4.10 AXLE RATIO

LIGHT TRUCK 1983-85 E-250/350 AND F-250/350

NOTE:

Before proceeding with this article, verify that the engine is operating within the guidelines stated in the 6.9L Diesel Engine Diagnostic Guide
(FPS-8433A). Form FPS- 8433C will replace FPS-8433A in the fourth quarter of 1985.

The subject concern may be due to vehicles upshifting at the low end (2700-2900 rpm) of the 1-2 and 2-3 rpm upshift tolerance band (2700-3400 rpm).
Installation of Upshift Kit (part number E5TZ-7A288-A) improves the early upshift condition by tightening the tolerance band resulting in a 3000 rpm
minimum 1-2 and 2-3 wide open throttle shift. This results in slightly improved vehicle performance with a 2 to 4 mph increase in kickdown, and wide
open throttle shift points.

Figure 18 - Control Valve Body Components

A/T - Poor Towing Power|Page 2655 > < Vacuum Regulator Valve - Adjustment Procedure|Page 2646