F 350 2WD Pickup V8-7.3L DSL (1988)
Clutch: Service and Repair
Low Reverse Clutch
WITH C6
REMOVAL
CAUTION: All parts must be handled carefully to avoid nicking or burring the bearing or mating surfaces. Lubricate all internal parts with clean
automatic transmission fluid before assembling them. Do not use any other lubricants except on gaskets and thrust washers. These may be coated with
petroleum jelly to facilitate assembly. Always use new gaskets and seals when assembling transmission.
1. Remove inner and outer seal from clutch piston.
INSTALLATION
1. Dip new seals in transmission fluid and install seals on piston.
