F 350 2WD Pickup V8-7.3L DSL (1988)
Differential Axle Housing: Service and Repair
Rear Suspension
1.
Remove four backing plate nuts from each side of axle and wire backing plate aside.
2.
Remove vent hose from vent and vent from brake junction block on rear axle housing.
3.
Remove brake line from clips on axle housing and remove brake junction block. Do not open brake lines when removing junction box.
4.
Support rear axle housing on suitable jack and remove U-bolt nuts and plates.
5.
Disconnect lower bolts on shock absorber mounting bracket and remove housing from vehicle.
6.
Reverse procedure to install.
