F 350 2WD Pickup V8-7.3L DSL (1988)
Wheel Hub: Technical Service Bulletins
Full Float Hub - Manual Correction
AXLE - FORD 10.25" FULL FLOAT DESIGN - HUB REMOVAL AND INSTALLATION PROCEDURE - SHOP MANUAL CORRECTION
Article No. 88-8-16
LIGHT TRUCK:
1988 F-250/350
ISSUE:
The hub removal and installation procedure as published in the 1988 Light Truck Shop Manual, Volume A, Section 15-09-16 is incorrect.
The notes and specifications in the illustration on top of the page have been changed.
FIGURE 13
ACTION:
If service is required, refer to the corrected illustration in this TSB article, Figure 13. This information should be inserted in your 1988
Light Truck Shop Manual, Volume A, Section 15-09-16.
OTHER APPLICABLE ARTICLES:
None
WARRANTY STATUS:
"INFORMATION ONLY"
