F 350 2WD Pickup V8-7.3L DSL (1988)
2.
Pull the weatherstrip from the metal flange (inside cab). Using a helper in the bed of the truck to catch the window assembly, push out the window
and the weatherstrip as an assembly from the opening. Clean sealant material on metal flange with cleaning agent E4AZ-19C507-AA or
equivalent. (Work in a well ventilated area. Avoid breathing cleaning agent fumes). Note the following warning on the Ford brand cleaning agent:
WARNING
HARMFUL IF SWALLOWED. IRRITATING TO EYES AND SKIN. CONTENTS UNDER PRESSURE.
Contains Isopropyl Alcohol and Morpholine (Alkaline Material). Do not take internally. Use only with adequate ventilation. Avoid contact with eyes and
prolonged or repeated skin contact. Do not puncture or incinerate container. Do not expose to heat or store at temperature above 120~F (49~C). If
swallowed, drink large quantities of water. Call physician immediately. For eye contact, flush eyes with water for 15 minutes and get medical attention.
For skin contact, wash thoroughly with soap and water.
KEEP OUT OF REACH OF CHILDREN
E4AZ-19C507-AA
FIGURE 1
3.
Close the sliding windows and place the window assembly on a flat surface with the window latch in the "down" position.
4.
Remove bright mylar clip from weatherstrip assembly (See Attachment 1, Figure 1).
