F 350 2WD Pickup V8-7.3L DSL (1988)
FIGURE 2
5.
Remove bright mylar strip from weatherstrip assembly.
6.
Remove the weatherstrip from the glass assembly and clean the sealant material from the gasket and slider windows (cleaning agent
E4AZ-19C507A-A or equivalent).
7.
Turn window over (sliding window latch in the "UP" position) remove screws from lower and upper aluminum track bar for sliding and stationary
glass assemblies (See Attachment 1, Figure 2).
8.
Using a hammer and a suitable tool lightly tap the upper aluminum track bar upward. Remove upper aluminum track bar. Remove right side
sliding glass assembly, lay sliding assembly on flat surface (See Attachment 1, Figure 2).
