ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6867 > < Initial Inspection and Diagnostic Overview|Page 6865
Page 1
background image

Garage Door Opener Transmitter: Pinpoint Tests

Universal Transmitter

Pinpoint Tests

Pinpoint Test A: The Universal Transmitter is Inoperative

Normal Operation

The universal transmitter is integral to the LH sun visor assembly. The universal transmitter can be programmed to operate up to 3 garage doors, entry
gates, security systems, and home or office lighting. The universal transmitter and the LH sun visor vanity mirror receives voltage through circuit CLN09
(YE/GN). Circuit GD179 (BK/VT) provides ground.

This pinpoint test is intended to diagnose the following:

-

Interior lamps system concern

-

Universal transmitter

-

Receiver unit

PINPOINT TEST A: THE UNIVERSAL TRANSMITTER IS INOPERATIVE

-------------------------------------------------
A1 CHECK THE LH SUN VISOR VANITY MIRROR OPERATION

-

Check the illumination of the LH sun visor vanity mirror lamps.

-

Do the LH sun visor vanity mirror lamps illuminate?

Yes

GO to A2.

No

REFER to Courtesy Lamp.  See: Lighting and Horns/Courtesy Lamp/Testing and Inspection

-------------------------------------------------
A2 PROGRAM A HAND-HELD TRANSMITTER INTO THE UNIVERSAL TRANSMITTER

-

NOTE: If the garage door is equipped with rolling codes, refer to Training a Garage Door Opener Equipped With "Rolling Codes".

-

Program the universal transmitter. Refer to Universal Transmitter Programming  See: Programming and Relearning.

-

Did the universal transmitter program successfully?

Yes

The universal transmitter is OK. VERIFY the receiver unit operates correctly.

No

INSTALL a new LH sun visor assembly. TEST the system for normal operation.

-------------------------------------------------

Initial Inspection and Diagnostic Overview|Page 6867 > < Initial Inspection and Diagnostic Overview|Page 6865