F 350 2WD Super Duty V10-6.8L (2009)
Ford Work Solutions(TM) Self-Diagnostic Mode
Ford Work Solutions(TM) Self-Diagnostic Mode
In-Dash Computer Self-Diagnostic Mode
NOTE: It is normal for popping sounds to be heard in the speakers while the in-dash computer is transitioning between modes. This is due to the power
cycling of the in-dash computer.
1. Turn the in-dash computer on and navigate to the home screen.
2. Press and hold the power button and the phone button simultaneously for 10 seconds, until the screen goes blank.
-
The system automatically restarts in diagnostic mode.
3. The following diagnostic routines are available:
