F 350 2WD Super Duty V10-6.8L (2009)
7. Remove the horn bracket bolt and the horn.
-
To install, tighten to 35 Nm (26 lb-ft).
8. Remove the bolts from the radiator mounting brackets.
-
To install, tighten to 35 Nm (26 lb-ft).
9. NOTE: Right side shown, left side similar.
Remove the 2 air deflector pin-type retainers on the front of the radiator support.
10. Remove the upper radiator grille support bolts.
-
To install, tighten to 35 Nm (26 lb-ft).
11. Remove the front radiator support bolts.
-
To install, tighten to 63 Nm (46 lb-ft).
12. Remove the radiator support.
13. To install, reverse the removal procedure.
