F 350 2WD Super Duty V10-6.8L (2009)
-
Install a new brake disc if not within specification.
8. Inspect the disc brake anchor plate assembly.
-
Check the guide pin boots for damage.
-
Check the guide pins for binding and damage.
-
Install new pins if worn or damaged. Lubricate the pins with silicone brake caliper grease.
9. NOTICE: Protect the piston and boots when pushing the caliper piston into the caliper bore or damage to the piston and/or boots may
occur.
To install, reverse the removal procedure.
-
Install new retraction clips.
-
If installing new brake pads, using a suitable tool and a worn brake pad, compress the disc brake caliper pistons into the caliper.